Partnering Manufacturers
We connect you withleading product lines

We proudly partner with only the highest-quality brands with a reputation for delivering parts and solutions that last.
UCC Environmental
Leader in material handling for coal & ash. Reduce wastewater generation & pollutant emissions.
We represent UCC Environmental in:
North DakotaSouth DakotaMinnesota- Leader in material handling solutions since 1920.
- Broad products and services for the utility and industrial power generation plants.
- Provide solutions to reduce wastewater generation.
- Provide air quality control systems that reduce pollutant emissions.
- Wet to Dry Ash Conversions. Mill rejects, reagents.
- Fly ash (dilute, medium, and dense phase) vacuum or pressure systems. Bottom ash (dry/wet designs) pneumatic, mechanical, or vibratory systems.
- Sorbent injection for the reduction of S02, S03, mercury and acid gases. Delivering cost effective solutions to reduce air pollutants from coal fired utilities and industrial boilers
- Wastewater treatment provides sustainable wastewater treatment solutions designed to meet ELG/CCR compliance and plant-specific discharge requirements.
UCC Environmental
Leader in material handling for coal & ash. Reduce wastewater generation & pollutant emissions.
See moreWe represent UCC Environmental in:
North DakotaSouth DakotaMinnesotaLjungstrom
State-of-the-art technology for new or replacement air preheaters for advanced heat recoveries.
We represent Ljungstrom in:
North DakotaSouth DakotaMinnesotaWyomingMontanaSolutions
– Field Assembled Air Preheaters
– Pre-Assembled Air Preheaters
– Gas-Gas Heaters
– SO3 Removal Technology
– Rotary Bed Adsorber
– Platforms and Anode Cages
– Specialized Fabrication
– Fuel Cell Thermal ManagemeOptimize your efficiency with AdvX Technology
– Maximize recovery and utilization of waste heat from flue gas
– Increase boiler efficiency, improved heat rate, lower coal consumption per kWh
– Cleaner emissions with improved ESP efficiency and lower SO3 emissionsReduce costs and consumption
– Reduce costs thanks to increased operation flexibility
– Reduce sootblower steam consumption and no air preheater foulingImprove your operations
– Extend air preheater element life
– Increase SCR catalyst lifeAid the environment
– Clear Stack
– Ultra-low emissions
– Reduce CO2, NOx, SOx, PM and Hg emissions
– Reduce FGD water consumption
– Reduce or eliminated waste waterLjungstrom
State-of-the-art technology for new or replacement air preheaters for advanced heat recoveries.
See moreWe represent Ljungstrom in:
North DakotaSouth DakotaMinnesotaWyomingMontanaClyde Industries
Leading provider of boiler efficiency solutions for demanding applications with sootblowers.
We represent Clyde Industries in:
North DakotaSouth DakotaEastern MontanaClyde Industries, a new spin-off from the Clyde Bergemann Power Group, is the leading provider of boiler efficiency solutions for demanding applications in the pulp & paper, power and other industrial markets. We are pushing the limits of our technology in sootblowers and poised to build on our history of innovation and superior customercentric solutions.
- Boiler Cleaning & Efficiency Solutions
- Economizer, Convection Pass Cleaning Solutions
- SCR Cleaning Solutions
- Advanced Control Systems for Sootblowers
- 60 years of experience in the Power Industry
- No. 1 supplier for High Power, Low Pressure Sootblowing (Pulp & Paper)
Clyde Industries
Leading provider of boiler efficiency solutions for demanding applications with sootblowers.
See moreWe represent Clyde Industries in:
North DakotaSouth DakotaEastern MontanaFox Equipment
Dampers, steel stacks, expansion joints, silencers / noise control equipment for the global market.
We represent Fox Equipment in:
North DakotaMinnesotaSouth DakotaMontana- Fox engineers have years of experience, using cutting-edge software tools.
- Fox design custom solutions optimized for performance and longevity at a competitive price.
- Dampers provide three functions: isolation, modulation, or diverting.
- Stack engineering, stack consulting and stack manufacturing services are all part of the Fox Equipment service offerings.
- Expansion Joints are primarily used to relieve the stress caused by constant or enduring system movement.
- Fox Equipment manufactures a complete array of fabric expansion joints. Our expansion joints can be mounted directly on our dampers to minimize field erection costs.
- Fox Equipment offers silencers and noise control products. Fox Equipment Silencers are employed at the inlet and outlet of industrial fans and on the discharge of turbine exhaust systems to reduce noise emissions to acceptable levels. Fox Equipment designs and manufactures silencers to meet specified noise levels while staying within pressure drop limitations.
- Fox Equipment is now providing noise control solutions.
- For turbine exhaust, we now offer any component or a complete package including: Diverter, Expansion Joints, Silencer and Stack.
- Heavy Duty Expansion Joints can replace OEM joints to reduce unplanned installations due to premature failure.
- High-quality stainless steel liners to handle temperatures of over 1200°F.
- Every Fox Equipment product is custom designed and engineered to exceed the expectations of its application and the expectations of our customers.
Fox Equipment
Dampers, steel stacks, expansion joints, silencers / noise control equipment for the global market.
See moreWe represent Fox Equipment in:
North DakotaMinnesotaSouth DakotaMontanaClear Stream environmental
Water & wastewater treatment solutions: Clarifiers, Thickeners, Digesters, Biological Processes
We represent Clear Stream environmental in:
North DakotaSouth DakotaMinnesota- Water & Wastewater Treatment Solutions for Municipal & Industrial
- Sedimentation Separation Equipment: Clarifiers, Thickeners, etc.
- Biological Process Equipment, Digester Covers
Clear Stream environmental
Water & wastewater treatment solutions: Clarifiers, Thickeners, Digesters, Biological Processes
See moreWe represent Clear Stream environmental in:
North DakotaSouth DakotaMinnesotaEvoqua
Raw water intake screens, High-Efficiency Microsand Filters, Automatic VAF Screen Filters.
We represent Evoqua in:
North DakotaSouth DakotaMinnesotaMontanaWyomingRaw Water Intake Screens
- Over 15,000 installations worldwide.
- Variety of raw water intake screens to meet every application.
- Traveling water screens, stationery water screens, stop logs, grab rakes, bar racks & pumps.
- OEM for aftermarket service, repair and parts for REX and LINK-BELT equipment.
- OEM drawings and specifications for many Envirex, FMC, Siemens, US Filter intake equipment.
- Compliant with US EPA section 316(b) – fish and other life forms are not impinged in the screen
- Top-side or below-water equipment assessments.
High-Efficiency Microsand Filters
- Commercial Cooling Loops
- Industrial Filtration Systems
V-Series Automatic Screen Filters
- No electric motors, gearboxes, pistons, or switches
- Flush waste is less than 1%
- Simple controls
- Low maintenance
Evoqua
Raw water intake screens, High-Efficiency Microsand Filters, Automatic VAF Screen Filters.
See moreWe represent Evoqua in:
North DakotaSouth DakotaMinnesotaMontanaWyomingSiemens
World leader in medium voltage drives (VFD). Predictive services minimize downtime.
We represent Siemens in:
North DakotaMinnesota- Engineers and manufactures the world’s leading medium voltage drives with the largest installed base and overall portfolio in the industry.
- Drive systems match perfectly with our high-voltage motors.
- Provides unparalleled levels of reliability, availability, flexibility and performance.
- Optimally engineered for a wide range of industries and applications such as: conveyors, pumps, fans, compressors.
- Specialized applications include: rolling mills, horizontal mills, shaft generators, high-speed compressors.
- Advanced features: cell bypass, cell redundancy, warning systems, dynamic braking.
Siemens
World leader in medium voltage drives (VFD). Predictive services minimize downtime.
See moreWe represent Siemens in:
North DakotaMinnesotaTeikoku
World’s largest supplier of sealless canned motor pumps for ANSI, API, ASTM applications.
We represent Teikoku in:
North Dakota- Manufactures sealless “canned motor” pumps.
- World’s largest supplier of canned pumps for ANSI, API, ASTM applications.
- Originally designed for the US Nuclear Navy and now designed for industrial applications where leaks are not tolerated.
- Monitor running clearances and bearing conditions for preventative maintenance.
- Teikoku, Chempump, Dynapump, and Refrigeration designs.
- Field Service Support
Teikoku
World’s largest supplier of sealless canned motor pumps for ANSI, API, ASTM applications.
See moreWe represent Teikoku in:
North DakotaPhase 1
Solidworks 3D designs linked to P&ID and Bill of Materials. Drone services for point clouds.
We represent Phase 1 in:
North DakotaMinnesotaSouth DakotaMontanaWyoming- 35 years of experience designing equipment with fluids to flow:
- Oil & Gas, Power & Cogeneration
- Boiler & Pump Skids
- Pump & Compressor Skids
- Vapor Recovery Systems
- Water & Wastewater, Beverage, Microelectronics, Healthcare, Pharmaceuticals
- Multi-Media
- UF Systems
- RO Systems
- Municipal, Pulp & Paper
- Clarifiers, Thickeners
- Oil & Gas, Power & Cogeneration
- Premium Drone & Asset Management
- Mapping & Surveying (green field)
- Asset Management (Point Clouds linked to P&IDs and Bill of Materials)
- 3D Modeling & Point Clouds
- Marketing & Real Estate Imagery
- Construction Monitoring
- Inspection Services
Phase 1
Solidworks 3D designs linked to P&ID and Bill of Materials. Drone services for point clouds.
See moreWe represent Phase 1 in:
North DakotaMinnesotaSouth DakotaMontanaWyoming- 35 years of experience designing equipment with fluids to flow:
Everest Valve Company
Custom, high quality engineered valves and strainers, can meet ANSI standards.
We represent Everest Valve Company in:
North DakotaSouth DakotaMinnesotaMontanaWyoming- Custom manufacturer of high quality engineered valves and strainers, standard ANSI designs.
- Butterfly Valves, Check Valves, Gate Valves, Relief Valves, Strainers.
- All materials are made 100% in the USA.
- Design combines both chemical and mechanical engineering expertise to meet customers specific needs.
- If the valve you are looking for is not found in a catalog then Everest can make it.
Everest Valve Company
Custom, high quality engineered valves and strainers, can meet ANSI standards.
See moreWe represent Everest Valve Company in:
North DakotaSouth DakotaMinnesotaMontanaWyomingCarter Process Control
High-pressure drop control valve internals to fit into any OEM valve. CCI & BTG parts are stocked.
We represent Carter Process Control in:
North DakotaMinnesotaSouth DakotaMontanaWyoming- Severe Service Control Trim Solutions.
- Specially engineered to solve problems and supplied as an upgrade to existing installed valve.
- Engineered to fit into any OEM valve for supply on a new project.
- 100% interchangeability with CCI disk stack technology.
- Holds inventory for all soft goods for CCI and BTG valves & actuators including packings, gaskets, and balance seals.
Carter Process Control
High-pressure drop control valve internals to fit into any OEM valve. CCI & BTG parts are stocked.
See moreWe represent Carter Process Control in:
North DakotaMinnesotaSouth DakotaMontanaWyomingFlowline
High quality valves (ball, butterfly, gate, globe, check) and actuators (pneumatic, electric).
We represent Flowline in:
North DakotaMinnesotaSouth DakotaMontanaWyoming- Manufactures a wide range of high-quality valves and actuators
- Product types include Ball Valves, Butterfly Valves, Gate Valves, Globe Valves, Check Valves
- Complete line of Pneumatic and Electric Actuators with an accompanying line of Automation Accessories.
Flowline
High quality valves (ball, butterfly, gate, globe, check) and actuators (pneumatic, electric).
See moreWe represent Flowline in:
North DakotaMinnesotaSouth DakotaMontanaWyomingGarlock
Mechanical packing, gasketing, bearing isolators, expansion joints, sheet material, and oil seals.
We represent Garlock in:
North DakotaSouth Dakota- Manufactures mechanical packing, gasketing, flexible metal gaskets, expansion joints and oil seals
Garlock
Mechanical packing, gasketing, bearing isolators, expansion joints, sheet material, and oil seals.
See moreWe represent Garlock in:
North DakotaSouth DakotaInertech
Form-in-place “Ring Gasket on a Roll”. Expanded TEFLON joint sealant, gasketing, and packing.
We represent Inertech in:
North DakotaMinnesotaSouth DakotaMontanaWyoming- One of the most versatile and widely used gasket materials available.
- Exceptional sealing properties and conformability, with resitance to creep and cold flow.
- Ideal for many bolted asseblies such as:
- standard flanges
- man ways
- tank covers
- ducting
- heat exchangers
- Performance Features:
- Wide pressure and temperature range
- Unsurpassed chemical compatibility
- Excellent creep and cold flow resistance
- Will not harden or deteriorate with age
- Low coefficient of friction allows easy removal
- Easily conforms to damaged or pitted flanges
- Low compressive load to seal
- Wide adhesive strip for easy installation for all shapes, vertical or horizontal
- Professional engineering support
Inertech
Form-in-place “Ring Gasket on a Roll”. Expanded TEFLON joint sealant, gasketing, and packing.
See moreWe represent Inertech in:
North DakotaMinnesotaSouth DakotaMontanaWyomingSolenis
Specialty chemical supplier for wastewater, cooling towers, boilers.
We represent Solenis in:
North DakotaSouth DakotaMinnesotaMontanaWyoming- Specialty chemical supplier that drives sustainability, operational efficiency, clean and healthy water.
- Water & Wastewater Treatment solutions
- Cooling Tower: biofilm, scale, corrosion, detection & control.
- Boiler: Corrosion & Scale Inhibitors, oxygen scavengers, alkalinity.
Solenis
Specialty chemical supplier for wastewater, cooling towers, boilers.
See moreWe represent Solenis in:
North DakotaSouth DakotaMinnesotaMontanaWyomingProtectolite
Moulded, reinforced, FRP composites for corrosion resistant, high strength applications.
We represent Protectolite in:
North DakotaSouth DakotaMinnesota- Molded, Reinforced, Thermoset Composites for corrosion resistant, light weight, insulating (electrical & thermal), high strength applications.
- Water Treatment applications: Launder Covers, Weir Plates, Baffles, Troughs, Density Current Baffles, Insulating Deck Covers.
Protectolite
Moulded, reinforced, FRP composites for corrosion resistant, high strength applications.
See moreWe represent Protectolite in:
North DakotaSouth DakotaMinnesotaAEGIS
Surface enhancements to mitigate corrosion, erosion, and wear. Tungsten carbide, cladding, etc.
We represent AEGIS in:
North DakotaSouth DakotaMinnesotaMontanaWyoming- Surface enhancement for Corrosion, Errosion, and Wear Protection.
- Infiltration Brazing
- Tungsten Carbide
- Chrome Carbide
- Boron Carbide
- Hot Wire Laser Cladding
- Corrosion Alloys
- Eorrosion Alloys
- Diffustion Coatings
- Boronizing & Boron Nitriding
- Chromizing
AEGIS
Surface enhancements to mitigate corrosion, erosion, and wear. Tungsten carbide, cladding, etc.
See moreWe represent AEGIS in:
North DakotaSouth DakotaMinnesotaMontanaWyomingSuperior Signal Company
Leaders in Leak Detection. Smoke Generators and AccuTrak Ultrasonic Leak Detectors.
We represent Superior Signal Company in:
North DakotaMinnesotaSouth DakotaMontanaWyomingSmoke Generator Applications
- Leak detection.
- Firefighting training.
- Sewere inflow leak detection.
- Special effects.
- HVAC testing.
- Truck and trailer leak detection.
- Law enforcement, military, IED simulation.
- Variety of air flow visualization.
Superior AccuTrak Ultrasonic Instrument Applications:
- Detecting the ultrasonic sound created by turbulence and friction in industrial equipment.
- Pinpoint compressed air leaks, vacuum leaks, refrigerant leaks.
- Locate worn bearings, and internal leaks through valves and steam traps.
Superior Signal Company
Leaders in Leak Detection. Smoke Generators and AccuTrak Ultrasonic Leak Detectors.
See moreWe represent Superior Signal Company in:
North DakotaMinnesotaSouth DakotaMontanaWyomingFougner Solutions
Glycol testing, ethylene & propylene glycol, closed-loop corrosion inhibitors.
We represent Fougner Solutions in:
North DakotaMinnesotaSouth DakotaMontanaWyoming- Represent one of the largest glycol manufactures in the USA
- Propylene Glycol
- Ethylene Glycol
- Fougner Solutions services closed loops which are often the most neglected parts of a process
- Glycol testing confirms:
- Glycol Concentration
- Inhibtor Strength
- Contaminates
Fougner Solutions
Glycol testing, ethylene & propylene glycol, closed-loop corrosion inhibitors.
See moreWe represent Fougner Solutions in:
North DakotaMinnesotaSouth DakotaMontanaWyoming- Represent one of the largest glycol manufactures in the USA
Fougner Pumps
Over 40 manufacturers of centrifugal and positive displacement pumps to select.
We represent Fougner Pumps in:
North DakotaMinnesotaSouth DakotaMontanaWyomingPump Types
ANSI 73.1, Air Operated Diaphragm, Centrifugal, Canned, Drum, Electric Diaphragm, Fiberglass, Gear, High Pressure, High Purity, Immersible, Inline, Lobe, Machine Coolant, Metering, Peristaltic, Positive Displacement, Progressing Cavity, Sanitary, Sealless, Self Priming, Special Purpose, Submersible, Vacuum, Verderhus Centrifugal, Screw, Vertical Turbine.
Pump Manufacturers
Aquatec, Berkeley, BJM Submersible, Boerger, Camac, Corcoran, Crane-Burks, Crane Crown, Crane Deming, Crane-Weinman, Dean, Eastern, Eclipse, Fybroc, General Pump, Goulds Water Technology, Graymills, Grundfos, Gusher, Haight Gear, Isochem/Pulsafeeder, Iwaki-America, Lewa, Marlow, Micropump, Myers, NOV MOYNO, Paco, Price, Prosser Subersibles, Scot, SPX Johnson, Standard Drum/Tote, STA-RITE, Summit, Teikoku, TonkaFlo, Verder, Yamadaaod, Wanner (Hydra-Cell), Walchem, Vertiflow.
Fougner Pumps
Over 40 manufacturers of centrifugal and positive displacement pumps to select.
See moreWe represent Fougner Pumps in:
North DakotaMinnesotaSouth DakotaMontanaWyomingFougner Engineered Sales
Sourcing hard-to-find parts from manufacturers both domestic and foreign.
We represent Fougner Engineered Sales in:
North DakotaMinnesotaSouth DakotaMontanaWyoming- For over forty years Fougner Engineered Sales has help source the hard-to-find parts.
- Source hundreds of items from small or obscure manufacturers both domestic and foreign.
- Fougner helps bridge the gap between large customers and large vendors.
- We understand customer service and will place orders your way.
Fougner Engineered Sales
Sourcing hard-to-find parts from manufacturers both domestic and foreign.
See moreWe represent Fougner Engineered Sales in:
North DakotaMinnesotaSouth DakotaMontanaWyomingBHI-FW
The world leader in pulverized coal, steam generated energy plant technology.
We represent BHI-FW in:
North DakotaSouth DakotaMinnesotaMontanaWyoming- World Leader in Energy Plant Technology.
- Performed the detailed design of all major pulverized coal, steam generator projects.
- BHI-FW provides the best quality energy equipment with the best engineering and service.
- Technologies include
- Supercritical Steam Generator
- Subcritical Steam Generator
- Firing Systems
- Pulverizer Systems
- SCR Systems
- Low NOx Solutions
- Performance Assessment/Optimization
BHI-FW
The world leader in pulverized coal, steam generated energy plant technology.
See moreWe represent BHI-FW in:
North DakotaSouth DakotaMinnesotaMontanaWyoming